How To Trim Weed?
For a perfectly rounded and smokable bud, you have to do your trimming properly. This is where we step in to teach you how to trim like a pro. Whether you choose to trim your buds while they are wet or dry, a proper trim ensures you get the final product you’re looking for. To learn more about trimming, read this instructional article.
The Essentials of Trimming Weed
It is essential to trim weed while you are going through the harvesting process. Why? Well, it lowers the harshness of the completed product. In comparison to the buds, the leaves have more chlorophyll. And for that reason, acidity to the throat might be the result, especially when the temperature hits the leaves. So, it is important to get rid of the leaves so the buds can be much easier to smoke and also smoother to smoke. When you trim your weed, it helps to boost the THC concentration. By nature, leaves have lower trichome concentration. If the marijuana leaves are on the bud, you will find fewer trichomes and lower THC in the product as a result. This will definitely affect the level of potency, the smoking experience and the flavor.
WHAT IS HAND TRIMMING?
Hand trimming is exactly what it sounds like. The leaves of each bud are individually trimmed by hand. Hand trimming is the traditional method of removing leaves and other unwanted plant material from your buds. It is a time-tested method that consistently delivers excellent results, albeit at a slow pace. However, if you have some dedicated trimmers, some time, and some patience, hand trimming will truly offer you the best result.
WHAT IS MACHINE TRIMMING?
A dry trimming machine can save you a huge amount of time in the trimming process. Typically, you can expect to take a full day to hand trim about a pound of weed. With a dry trim machine, that amount jumps up to 8 to 16 pounds an hour. Don’t expect a dry trimming machine to completely replace the hand trim. But it can get the job about 80% done, leaving you with just a bit of hand finishing at the end.
How to Prune a Marijuana Plant in 5 Steps?
Step 1: Prepare the Tools
To start, get a pair of garden scissors or clippers and make sure that they are sharp.
Step 2: Remove Big Branches
Removing the bigger branches first will make it easier to work on the smaller details.
Step 3: Clear Out the Middle
Branches that grow in the middle of the plant are not as strong as the ones on top. So, clear them out as well.
Step 4: Work on the Leaves and Bud Sites
For the leaves, always start with the yellowing or dying ones.
Step 5: Give Time for Recovery
As mentioned, it takes time for the plant to heal the wounds of the cutting. So, give it a few days to recover from the shock. In the meantime, make sure to provide proper care by continuing to provide its basic needs. Within a week of the pruning, we can notice the vigorous growths of new shoots and leaves.
Best Bud Trimmer Machines and Tools
Risentek Bud Leaf Trimmer Machine
Benefits of the Risentek 16-inch Bud Leaf Trimmer Machine
Trimpro Unplugged
The Trimpro Unplugged is a hand-operated bud trimmer machine. The machine is designed for instances where noisy power tools are not applicable. You might want to tend to the flowers in your apartment. The Trimpro Unplugged is a great option so that you do not inconvenience other residents of the apartment with noise.
Eco Farm 16-Inch Leaf Bowl Trimmer
When we tested the bud trimmers for this review, it was hard to determine which one was going to come out on top because they are all so great. But alas, only one could be the winner. We liked the ECO Farm leaf bowl trimmer as our runner-up for the second best bud trimmer and it is easy to see how clean the leaves are getting as you crank the spinner.
Centurion Tabletop Pro Trimmer
All of their models come with two sets of electroplished stainless steel tumblers: one made specifically for dry trimming and one made for wet bud. The advantage of this over having a single universal tumbler to handle both type of buds is that each tumbler is designed to maximize quality and speed.
The wet tumbler uses narrower slats so there is more open area for the buds to come into contact with the cutting blade. This makes for both a tighter and a faster cut. You only need one pass, instead of two, cutting your processing time in half.
The Essentials of Trimming Weed
It is essential to trim weed while you are going through the harvesting process. Why? Well, it lowers the harshness of the completed product. In comparison to the buds, the leaves have more chlorophyll. And for that reason, acidity to the throat might be the result, especially when the temperature hits the leaves. So, it is important to get rid of the leaves so the buds can be much easier to smoke and also smoother to smoke. When you trim your weed, it helps to boost the THC concentration. By nature, leaves have lower trichome concentration. If the marijuana leaves are on the bud, you will find fewer trichomes and lower THC in the product as a result. This will definitely affect the level of potency, the smoking experience and the flavor.
WHAT IS HAND TRIMMING?
Hand trimming is exactly what it sounds like. The leaves of each bud are individually trimmed by hand. Hand trimming is the traditional method of removing leaves and other unwanted plant material from your buds. It is a time-tested method that consistently delivers excellent results, albeit at a slow pace. However, if you have some dedicated trimmers, some time, and some patience, hand trimming will truly offer you the best result.
WHAT IS MACHINE TRIMMING?
A dry trimming machine can save you a huge amount of time in the trimming process. Typically, you can expect to take a full day to hand trim about a pound of weed. With a dry trim machine, that amount jumps up to 8 to 16 pounds an hour. Don’t expect a dry trimming machine to completely replace the hand trim. But it can get the job about 80% done, leaving you with just a bit of hand finishing at the end.
How to Prune a Marijuana Plant in 5 Steps?
Step 1: Prepare the Tools
To start, get a pair of garden scissors or clippers and make sure that they are sharp.
Step 2: Remove Big Branches
Removing the bigger branches first will make it easier to work on the smaller details.
Step 3: Clear Out the Middle
Branches that grow in the middle of the plant are not as strong as the ones on top. So, clear them out as well.
Step 4: Work on the Leaves and Bud Sites
For the leaves, always start with the yellowing or dying ones.
Step 5: Give Time for Recovery
As mentioned, it takes time for the plant to heal the wounds of the cutting. So, give it a few days to recover from the shock. In the meantime, make sure to provide proper care by continuing to provide its basic needs. Within a week of the pruning, we can notice the vigorous growths of new shoots and leaves.
Best Bud Trimmer Machines and Tools
Risentek Bud Leaf Trimmer Machine
Benefits of the Risentek 16-inch Bud Leaf Trimmer Machine
- The machine is highly precise.
- You have total control over the speed to use.
- You can trim your marijuana when either wet or dry.
- It has 20 adjustable blades.
Trimpro Unplugged
The Trimpro Unplugged is a hand-operated bud trimmer machine. The machine is designed for instances where noisy power tools are not applicable. You might want to tend to the flowers in your apartment. The Trimpro Unplugged is a great option so that you do not inconvenience other residents of the apartment with noise.
Eco Farm 16-Inch Leaf Bowl Trimmer
When we tested the bud trimmers for this review, it was hard to determine which one was going to come out on top because they are all so great. But alas, only one could be the winner. We liked the ECO Farm leaf bowl trimmer as our runner-up for the second best bud trimmer and it is easy to see how clean the leaves are getting as you crank the spinner.
Centurion Tabletop Pro Trimmer
All of their models come with two sets of electroplished stainless steel tumblers: one made specifically for dry trimming and one made for wet bud. The advantage of this over having a single universal tumbler to handle both type of buds is that each tumbler is designed to maximize quality and speed.
The wet tumbler uses narrower slats so there is more open area for the buds to come into contact with the cutting blade. This makes for both a tighter and a faster cut. You only need one pass, instead of two, cutting your processing time in half.
Comments
Post a Comment